Yamaha FZR600 (3HE 89-90) Carburettors Ultrasonically Cleaned

Yamaha FZR600 3HE (89-90) carburettors – ultrasonically cleaned and in good used condition as shown.
These carbs are the earlier 3HE type with two screws for each float bowl, they are fitted with standard 5CFZ4 needles, size 107.5 and 52.5 main jets and size 30 pilot jets.
The fuel supply t-pieces on the float bowls feel quite loose so new o-rings may be required.

Restoring and riding older bikes ourselves, we know how much difference clean carbs make and we’ve been ultrasonically cleaning our own carbs for several years with great results…

Our stock of used carburettors were removed from their donor motorcycles at least 15 years ago (2007 and before) in the days before petrol turned quickly to sludge and we are nearly always astonished at how clean our carbs appear inside with their float bowls removed.

To make doubly sure that these carbs are as good on the inside as we’d want them to be on one of our bikes, we’ve stripped out all of the jets etc, ultrasonically cleaned the whole bank as a single unit, along with all of the jets and other small parts while still removed. After cleaning, all parts are rinsed, dried and blown through with compressed air before being visually inspected and then carefully reassembled, ensuring that all of the components are reinstalled into the carb bodies from which they came.

While we can’t guarantee that our carbs won’t need new float bowl gaskets – and they’ll almost certainly benefit from properly setting up – if you look at the photos you’ll see that you’d be off to a very good start with these carburettors, and you’ll certainly avoid the time and cost of getting the professionally cleaned before fitting them to your bike.