Yamaha FZR600R 4JH 4HM(94-95) empty (no jets, diaphragms, etc) carburettor bodies in very good used condition as shown with top caps, float bowls and intake stacks/trumpets. The outer edges of some of the velocity stacks/trumpets appear to have been cut away/reprofiled slightly as shown in the photos – this should have no effect on their use.
Restoring and riding older bikes ourselves, we know how much difference clean carbs make and we’ve been ultrasonically cleaning our own carbs for several years with great results.
Our stock of used carburettors were removed from their donor motorcycles at least 12 years ago (2007 and before) in the days before petrol turned quickly to sludge and we are nearly always astonished at how clean our carbs appear inside with their float bowls removed.
To make doubly sure that these carbs are as good on the inside as we’d want them to be on one of our bikes, we’ve carefully dismantled each carb and ultrasonically cleaned the whole bank as a single unit, along with the float bowls and any other small parts while still removed. After cleaning, all parts are rinsed, dried and blown through with compressed air before being visually inspected and then carefully reassembled, ensuring that all of the components are reinstalled into the carb bodies from which they came.
While we can’t guarantee that our carbs won’t need new float bowl gaskets, etc. – and they’ll certainly benefit from being properly set up – if you look at the photos you’ll see that you’d be off to a very good start with these carburettors, and you’ll certainly avoid the time and cost of getting the professionally cleaned before fitting them to your bike.